Filter

317 4 820
Osburn 1100 Wood Burning Fireplace Insert
Osburn 1100 Wood Burning Fireplace Insert

Osburn 1100 Wood Burning Fireplace Insert

$ 1 349.00
+
-
ADD TO CART

The Osburn 1100 Wood Burning Fireplace Insert. This small wood insert from Osburn is ideal for a small masonry fireplace or possibly a prefabricated (factory built fireplace) . With a depth requirement of only 12 7/8' inches its a ideal choice for shallow or narrow fireboxes. Although the Osburn 1100 fireplace insert has a small firebox it is capable of heating up to 1400 sq feet. If you have any questions about this quality wood burning insert from Osburn give our experts a call today+1 (347) – 720 – 6655 .

1100 WOOD INSERT

The 1100 insert is the ready-made solution for smaller stone fireplaces. With its back face at a 45 angle, it offers a wide range of configurations.The floor of its firebox is 2.5 inches deep, allowing greater accumulation of ashes and cleaner use.

The 1100 insert also comes with a powerful 144 CFM blower. You'll be amazed and delighted by the 50,000 BTU/h of heat it provides!

94% of the last 50 homeowners who have registered their warranty are satisfied with this product.

Required accessories

BLACK CAST IRON DOOR OVERLAY

OA10230

BLACK FACEPLATE TRIMS (29' X 44')

OA10122

BRUSHED NICKEL CAST IRON DOOR OVERLAY

OA10234

BRUSHED NICKEL FACEPLATE TRIMS (29' X 44')

OA10123

REGULAR FACEPLATE KIT (29' X 44')

OA10450

Appliance performance (1)

Fuel type : Dry cordwood Recommended heating area (sq.ft.) : () 250 - 1,400 Firebox volume (cu. ft.) : 1.5 Maximum burn time : () 6 h Maximum heat output (dry cordwood) : (2) 50,000 BTU/h (14.6 kW) Overall heat output rate (min. to max.) : (2) (3) 11,000 BTU/h (3.2 kW) to 35,000 BTU/h (10.2 kW) Average overall efficiency (EPA cribs / Douglas fir) : (3) 70.0 % (HHV) (4) 75.0 % (LHV) (5) Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5) Optimum efficiency : (6) (7) 75 % Average particulate emissions rate : (8) 2.9 g/h Average CO : (9) N.A.

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft and 20 lb/ft. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft and 12 lb/ft. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) This appliance is officially tested and certified by an independent agency.

(9) Carbon monoxyde.

General features Maximum log length 17'' Log positioning Over width Recommended chimney diameter 6' Minimum chimney height (feet) 15 Baffle type High heat-resistant C-cast Approved for a mobile home installation No Weight 297 lb (135 kg) Door type Single, glass with cast iron frame Glass type Ceramic glass Glass surface dimensions (Width X Height) 15'' X 8 3/8'' Overall dimension (Height) 21 1/8'' Overall dimension (Width) 25 1/2'' Overall dimension (Depth) 22 1/4'' Door opening dimension (Height) 8 3/8'' Door opening - dimension (Width) 15 5/8'' Firebox dimension (Height) 11 1/2'' Firebox dimension (Width) 18 1/8'' Firebox dimension (Depth) 12 5/8'' Steel thickness body 3/16' Steel thickness top 3/16' Centre line of flue outlet to the side 12'' Centre line of flue outlet to the back 3 7/8'' Fireplace opening minimum (Height) 21 3/4' Fireplace opening minimum (Width) 26' Fireplace opening minimum (Depth) 12 7/8' USA standard (emissions) EPA Method 28 Canadian standard (emissions) CSA B415.1 USA standard (safety) UL 1482 Canadian standard (safety) ULC S628 Tested and listed as per applicable standards By an accredited laboratory (CAN/USA) Warranty Limited lifetime Minimum clearances to combustibles *

(Data expressed in inches. 1 inch = 25.4 mm) Canada USA Single wall pipe Double wall pipe Single wall pipe Double wall pipe Back Sides Corners Top ** N.A. N.A.

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Measured from the platform on which the product is installed. Some appliances have been tested with a low ceiling. If necessary, consult the owner's manual for information on these clearances to combustible materials.

Fuel type : Dry cordwood Heating area : 250 - 1,400 Ft2 Maximum heat output : 50,000 btu