Osburn Volta Pellet Stove

Osburn Volta Pellet Stove

$ 4 061.00
+
-
ADD TO CART
OP00055 VOLTA PELLET STOVE Fuel type : Pellet (Premium grade or better) Heating area : 500 - 2,000 Ft 2 Maximum output : 45,600 BTU/h (13.4 kW) The Volta, Osburn’s newest pellet stove, is a quiet and contemporary model. Its innovative components use direct current (DC) and can now operate using the optional 24 volt battery system in the event of a power interruption. The unit can also be easily connected to solar panels or other secondary source of renewable energy. The Volta is the complete package, an ENVIROnmentally friendly heater that delivers power, efficiency, reliability and cleanliness. Options                                                         24V (2 X 12V) BATTERY KIT AC01454 3" FRESH AIR INTAKE KIT AC01240 3" X 10' INSULATED FLEX PIPE FOR FRESH AIR INTAKE KIT AC02092 BATTERY HOLDER KIT AC01452 DIGITAL WALL THERMOSTAT AC05558 LCD TOUCH SCREEN SLIDING SYSTEM AC01453 REMOTE CONTROL PROGRAMMABLE THERMOSTATIC AC05568 THERMOSTATIC CONTROL ON-OFF REMOTE AC02012 Appliance performance ( 1 ) Fuel type : Pellet (Premium grade or better) ( 2 ) Recommended heating area (sq.ft.) : () 500 - 2,000 Hopper capacity : 60 lb (27 kg) Maximum burn time : () 50 h Maximum heat input rate : ( 3 ) 45,600 BTU/h (13.4 kW) Overall heat output rate (min. to max.) : ( 4 ) 7,200 BTU/h (2.1 kW) to 24,800 BTU/h (7.3 kW) Average overall efficiency : ( 5 ) 62.8 % (HHV) ( 6 ) 67.7 % (LHV) ( 7 ) Optimum efficiency : ( 8 ) ( 9 ) 75 % Burn rate : 1.2 - 5.3 lb/h Average particulate emissions rate : ( 10 ) 2.5 g/h Average CO : ( 11 ) 111.8 g/h Average electrical power consumption for ignition cycle : ( 12 ) 1.6A (192W) Average electrical power consumption for continuous operation : ( 12 ) 0.3 - 0.6A (36 - 72W) ( 1 ) Values are as measured per CSA B415.1-10, except for the recommended heating area, hopper capacity, maximum burn time and maximum heat input rate. Results may vary depending on pellet quality, density, length, and diameter. ( 2 ) Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus. () Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type, feed rate, fuel level, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature considering that the space configuration and the presence of heat distribution systems have a significant impact in making heat circulation optimum. ( 3 ) Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb. ( 4 ) As measured per CSA B415.1-10 stack loss method. ( 5 ) Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand. ( 6 ) Higher Heating Value of the fuel. ( 7 ) Lower Heating Value of the fuel. ( 8 ) Performances based on a fuel load prescribed by the standard at 7 lb/ft? and with a moisture content between 19% and 25%. ( 9 ) Optimum overall efficiency at a specific burn rate (LHV). ( 10 ) This appliance is officially tested and certified by an independent agency. ( 11 ) Carbon monoxyde. ( 12 ) Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance. General features Combustion Technology Bottom-feed Clearance – top (measured from the floor) 14 5/8" Centre line of flue outlet to the side 4 3/8" Noise level at 6 feet 45 dBa (+/- 3 dBa) - 52 dBa (+/- 3 dBa) Recommended chimney diameter 3" Baffle type Stainless steel Approved for a mobile home installation Yes Weight 411 lb (186 kg) Door type Single, glass with steel frame Glass type Ceramic glass Glass surface – dimensions (Width X Height) 5 3/4" X 10" Overall dimension (Height) 41 1/8" Overall dimension (Width) 21 3/4" Overall dimension (Depth) 28 1/8" Centre line of flue outlet to the side 4 3/8" Centre line of flue outlet to the floor 14 5/8" Voltage and frequency 88 - 264 VAC (47 - 63 Hz) AC Current 3.6A/115VAC - 1.8A/230VAC Battery back-up 24V DC (20 Ah) Main control board fuses ATC 7.5A 32VDC Battery back-up control board fuses ATC 7.5A 32VDC Power cord inlet socket fuse 3A / 250V (5 X 20) Main board battery CR2032 USA standard (emissions) EPA Canadian standard (emissions) CSA B415.1-10 USA standard (safety) UL 1482, ASTM E1509 Canadian standard (safety) ULC S627 Tested and listed as per applicable standards By an accredited laboratory (CAN/USA) Warranty Limited lifetime